RENOLIN BAKOIL HT 100 & 200 (Formerly STABYLAN BAKOIL 100 & 200)
Graphite oven chain lubricant in a light oil carrier
Description
RENOLIN BAKOIL lubricants offer a selection of graphite dispersions in an odorless petroleum distillate carrier fluid. The fluid distributes the graphite powders to leave a dry-film coating for baking at up to 550°F. These products are not to be applied while the oven is at operating temperature. RENOLIN BAKOIL HT 100 uses fine amorphous graphite powders. It is easy to apply and assures good penetration. RENOLIN BAKOIL HT 200 uses high carbon flake graphite for maximum wear protection.
Advantages
- BAKOIL HT 100: fine graphite powder, easy to apply
- BAKOIL HT 200: high carbon flake, maximum anti-wear
- Odor-free carrier burns off quickly and cleanly
- No excessive smoking or hard build-ups
Application
RENOLIN BAKOIL HT series is primarily designed for lubrication of the chain and track on traveling hearth or tray tunnel ovens. RENOLIN BAKOIL HT should be mixed thoroughly to assure solids are uniformly dispersed before starting and stir occasionally during application. It can be sprayed or brushed on. Be sure all burners are off and the oven has cooled below 250°F. Keep oven doors open and exhaust fans running while lubricant is being applied and for at least 15 minutes afterward.
Notes
RENOLIN BAKOIL is not rated as a lubricant for food contact. Take care to avoid direct and incidental contact with food products. The carrier is a combustible fluid. Observe proper precautions for handling this type of fluid.
Industries
- Food
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.