ECOCUT HFN 13 LE UNI
Cutting & Grinding Oil
Description
ECOCUT HFN 13 LE UNI is a multi-purpose oil for cutting, grinding and honing operations. It is designed to rationalize lubricant inventories and can also be used for hydraulic systems and spindle oil applications (consult your FUCHS representative for details).
ECOCUT HFN 13 LE UNI is recommended for normal to difficult machining operations on cast iron, steel and non-ferrous metals. The optimized heat transfer properties permit higher feed and cutting speeds.
The LE designation signifies “low evaporation” and stands for excellent anti-mist properties and low evaporation during use. These oils contribute towards reducing environmental and workshop pollution.
Advantages
- Free of chlorinated paraffins
- Low evaporation technology
- Outstanding anti-mist properties
- Extreme pressure (EP) lubricity additives are free of chlorine and zinc
- Excellent surface quality, especially for finishing operations
- Good detergency and dispersing qualities
- Excellent corrosion protection
- Good cooling and lubrication
How to Use
ECOCUT HFN 13 LE UNI is used as received for all machining operations. Your local FUCHS representative can provide you with specific recommendations for your operation.
The product should be stored in its original sealed container at temperatures between 45ºF and 90ºF.
Safety data sheets are available. Before handling, read the product information and safety data sheets for proper handling and health hazard information.
How to Clean
Residual films are readily cleaned from parts with RENOCLEAN alkaline cleaners. Your local FUCHS representative can provide you with specific recommendations for your operation.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.