RENOCLEAN 9045
Spray Cleaner
Description
RENOCLEAN 9045 is a liquid detergent designed for use in single or multi-stage systems. It rapidly eradicates quench oil, metal fines and synthetic coolants from steel alloys. It should be tested before using on copper or brass copper and brass and is not recommended for aluminium alloys.
Featuring low foam levels, optimally at temperatures of 120F and higher, RENOCLEAN 9045 tolerates a wide variety and large volume of soils before dumping is required. Left un-rinsed, it imparts a slight film to yield in-process rust protection. This protective layer is compatible with downstream heat treatment and tempering operations. In addition, this product promotes consistent pH stability to extend washer bath life.
Advantages
- Safe to use prior to heat treatment and surface hardening operations
- Compatible with waste water treatment systems
- Mild pH promotes a safe work area
- Imparts corrosion protection to prevent rusting between operations
- Sophisticated surfactants help remove straight oils and machining residues
- Provides excellent pH stability
- Ideal for single or multi-stage spray systems
- Rejects tramp oils for robust bath life
How to Use
RENOCLEAN 9045 is mixed with water for use. Your local FUCHS representative can make specific recommendations for your operation. When mixing, always add RENOCLEAN 9045 concentrate to water.
The product should be stored in its original sealed container at temperatures between 45°F – 90°F. Safety data sheets are available. Please review product information and safety data sheets for proper handling and health hazard information.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.