RENOCLEAN AIR HOLD-DOWN
Description
RENOCLEAN AIR HOLD-DOWN contains a combination of natural binding and wetting agents. As the diluent water evaporates, the residues bond particles together to hold dust down. Additionally, the product has a humectant property that helps retain latent moisture. RENOCLEAN AIR HOLD-DOWN is readily biodegradable as determined by OECD 302-B. RENOCLEAN AIR HOLD-DOWN is classified as Water Danger Class 1 (WGK 1). This is the lowest category possible and an indication of low ecotoxicity and high biodegradability.
Performance Features
- Extremely low ecotoxicity
- Reduction of housekeeping
- Lower maintenance costs
- Globally available formulations
- Reduced water consumption
- Worldwide technical back-up
- No hazard labelling
- Non-corrosive
- Easy mix and application
- Low odor
- May reduce explosion hazards
- Improvement of air-quality
- Increased visibility
- Readily biodegradable
Advantages
- General purpose; for above-ground mining activities, applying to stockpiles & haulage roads
- Typically utilized at 1 - 5% dependent on application
Industries
- Mining, quarrying, exploration
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.