RENOLIN AIR 8000 SERIES
Diester-Based Compressor Lubricant
Description
RENOLIN AIR 8000 SERIES are fully synthetic compressor oils specially formulated with premium synthetic ester base fluids for use in a wide variety of air compressors. RENOLIN AIR 8000 SERIES is especially designed for high pressure air compressors. RENOLIN AIR 8000 SERIES is recommended for reciprocating compressors and vacuum pumps using the following gases: air, ethylene, methane, propane, butadiene, natural gas, synthesis gas, carbon monoxide, carbon dioxide (dry), helium, hydrogen sulfide (dry), nitrogen, furnace (crack) gas, hydrogen, and sulfur hexafluoride. Nominal Operating Range is -15°C to 230°C (5°F to 445°F)
How to Use
RENOLIN AIR 8000 SERIES covers a broad range of applications including rotary screw compressors, rotary vane compressors, reciprocating compressors, vacuum pumps, centrifugal compressors, high pressure air compressors, gear boxes and chains. Your local FUCHS representative can provide you with specific recommendations for your operation.
The product should be stored in its original sealed container at temperatures between 7ºC (45ºF) and 32ºC (90ºF). Safety data sheets are available. Before handling, read the product information and safety data sheets for proper handling and health hazard information.
Advantages
- Outstanding thermal and oxidative stability
- Will not varnish or form carbon deposits
- Wide operating temperature range
- Built in detergency action
- Extended drain intervals reduce oil disposal, thus increasing cost effectiveness
- Caution: May affect some paint finishes, plastics, and seals
Industries
- Machinery, equipment
- Other industries
- Mining, quarrying, exploration
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.