RENOFORM EXT 319 HT
Description
RENOFORM EXT 319 HT is a medium duty, non-chlorinated, semi-synthetic lubricant that contains significant extreme pressure (EP) additives. It is intended for difficult cold forming operations on cold headers and cold part and tube formers. It is especially effective for operations that generates excessive heat and works successfully with ferrous and stainless-steel material.
RENOFORM EXT 319 HT contains very little mineral oil yet provides excellent EP lubrication to reduce the generation of heat and reduce or eliminate smoke. It also reduces or eliminates the varnishing of lubricant on manufactured parts. Any residual film remains oily, so parts are easy to clean.
RENOFORM EXT 319 HT is inhibited to avoid corrosion of copper and copper alloys. This promotes safe dual side lubrication where equipment and the product permit.
Application
RENOFORM EXT 319 HT is typically used as received without diluting. It is flowed or flooded directly onto dies and punches on large headers or part formers. It can be applied directly to the wire or rod on small headers.
RENOFORM 319 HT is readily cleaned from work pieces with mild to moderately alkaline cleaner solutions.
Advantages
- Excellent EP Lubrication
- Low Oil Formula
- Negligible Staining or Varnishing
- Non-Corrosive
- Performs Well in Difficult Operations
- No Smoke. Better Work Conditions.
- Residue Cleans Easily.
- Dual-Side Capability
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.