RENOFORM EXT 702 K
Neat Oil Extrusion. Heavy-Duty Cold Forming Lubricant
Description
RENOFORM EXT 702 K is a non-chlorinated cold extrusion fluid intended for medium to heavy duty applications. It contains extreme pressure (EP) additives to provide extended tool life and fine finishes, and its residues are easily cleaned from production parts.
RENOFORM EXT 702 K is non-corrosive to copper and copper alloys. Where viscosity permits, this safeguards its use on both tool and lubricant sides of the machine. Dual side capability ends problems of cross contamination of die and machinery lube. This means the components of the gear box are protected from possible corrosion by die lubricants, and the die lubricants do not become diluted and ineffective with the gear lubricants.
Die Lubrication - RENOFORM EXT 702 K is typically used as received without dilution. It should be flooded on to the tools in the die area. On smaller machines it can be applied directly to the rod or wire. On easier jobs, for economy, RENOFORM EXT 702 K can be diluted with blending oil.
Machine Lubrication - RENOFORM EXT 702 K is used as received. Note: Viscosity must conform to machine requirements.
Application
RENOFORM EXT 702 K is typically used as received without dilution. It is flowed or flooded directly onto the dies and punches on large headers or parts formers. It can be applied directly to the wire or rod on small headers.
RENOFORM EXT 702 K is readily cleaned from work-pieces with mild to moderately alkaline cleaner solutions.
Advantages
- Contains EP additives
- Dual side capability
- Easily cleaned
- Non-chlorinated
- Extended tool life; no metal pick-up on tools
- No cross contamination/longer tool life/no gear side corrosion
- No “down-line” problems
- Easier disposal
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.