RENOFORM OL 388B
Medium Duty Drawing Forming and Stamping Oil
Description
RENOFORM OL 388B is a medium duty drawing, forming and stamping oil suitable for use on all metals including copper, brass and high alloy materials. It contains extreme pressure (EP) additives and lubricity enhancers for smooth metal flow and extended tool life. Further, it has a low viscosity to spread evenly and produce uniform coatings.
RENOFORM OL 388B residual films pro-vide temporary in-process corrosion protection to reduce rework, and they are readily cleaned to pre-vent down-stream problems.
Advantages
- Versatile
- Contains EP additives and lubricity enhancers
- Low viscosity
- Readily cleaned
- In-process corrosion protection
- Many metals/Many operations
- Smooth metal flow/Extended tool life
- Spreads evenly/Uniform coatings
- Prevents down-stream problems
- Reduces rework
How to Use
RENOFORM OL 388B is used as received without dilution. It can be applied using brush, spray, drip, or roller coat equipment.
How to Clean
RENOFORM OL 388B residues are readily cleaned using solvents or alkaline cleaner solutions.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.