RENOFORM OL 569 NE
Neat Oil Forming and Stamping. Moderate Duty Non-Chlorinated Drawing and Forming Oil
Description
RENOFORM OL 569 NE is a low viscosity moderate duty non-chlorinated drawing and forming oil. It is intended for moderate to severe operations on ferrous and non-ferrous metals.
RENOFORM OL 569 NE contains an extreme pressure (EP) additive and lubricity package to provide outstanding anti-weld properties, extended tool life and excellent part quality. It is readily cleaned from finished work to avoid “down-stream” problems. Because of its low viscosity, RENOFORM OL 569 NE is easily applied, and it drains freely from parts to reduce consumption.
Advantages/Benefits
- Contains an EP and lubricity package
- Readily cleaned
- Low viscosity
- Extended tool life/Fine finishes
- Avoids “down-stream” problems
- Easily applied, drains freely from parts to reduce consumption
How To Use
RENOFORM OL 569 NE is used as received without dilution and can be applied by spray, roll coater, brush or swab.
How To Clean
RENOFORM OL 569 NE is readily cleaned from parts with solvents or alkaline cleaner solutions.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.