Liigu sisule
Metlaworking fluids

Tõhusate lahenduste pakkumine metallitöötlemiseks

Kompleksuse omaksvõtt nõustamise, toodete ja teenuste kaudu

Metallitöötlemise pidevalt arenevas tööstusharus nõuab tõhususe ja tootlikkuse saavutamine terviklikku lähenemist, mis arvestab tegevuste keerukust. FUCHS mõistab selle tööstuse mitmekesiseid väljakutseid ning pakub lahendusi, mis hõlmavad nii nõustamist, tooteid kui ka laia teenusteportfelli.

Meie tööstuse professionaalide meeskond ühendab põhjalikud teadmised ja sügava arusaamise metallitöötlemise protsessidest, et pakkuda väärtuslikke nõuandeid töövoogude optimeerimiseks, tõhususe parandamiseks ja tegevuslike takistuste ületamiseks.

 

FUCHS: Teie kohalik partner metallitöötlemise erilahendustes

FUCHS juures usume, et edu aluseks on lähedane koostöö klientidega ning nende konkreetsete vajaduste mõistmine. Seepärast oleme loonud tugeva kohaliku kohaloleku teie riigis, mis võimaldab meil pakkuda kohapealset tuge ja pakkuda kohandatud lahendusi, mis vastavad teie ainulaadsetele nõudmistele.

Meie inimesed teie kõrval aitavad teil kasutada FUCHSi globaalset oskusteavet ja ressursse, samal ajal nautides kohaliku partneri eeliseid, kes tunneb teie turu ja tööstuse eripärasid. Meie pühendumus kliendirahulolule innustab meid pakkuma enamat kui lihtsalt tooteid ja teenuseid – pakume erakordset tuge igal sammul. Meie lähedus, tehniline pädevus ja kohandatud lahenduste loomise võime tagavad, et saate kõrgeima tasemega toe ja kõige tõhusamad metallitöötlemise lahendused.

 

Image description

Enne sobiva toote valimist külastame oma kliendi tootmisliini, arutame individuaalseid protsesse, vajadusi ja ootusi. Seejärel tehakse otsused vedeliku ja kohapealsete testide kohta.

Image description

FUCHS mobiilne õluteenindus hoolitseb süsteemi puhtuse eest enne vedeliku täitmist ning filtreerib ja hooldab kasutuses olevat vedelikku.

Image description

Meie puhastusvahendid, mis sobivad erinevateks rakendusteks, hoiavad töödeldud komponendid puhtad ning tagavad masina keskkonna ja vedeliku ringluse süsteemide puhtuse.

Image description

Pakume sobivaid metallitöötlemise tooteid – vee- või puhtaid lahuseid –, mis vastavad kliendi vajadustele lõikeprotsessi, töödeldava materjali tüübi ja optimaalse majanduslikkuse osas kasutuses.

Image description

FUCHS labor suudab välja töötada klientidele kohandatud lahendusi, kontrollib tarnitavate toodete kõrgeimat kvaliteeti ning jälgib kasutuses olevate vedelike praeguseid parameetreid.

Image description

FUCHS pakub täiendavat masinaõlide ja -rasvade komplekti, mis on ühilduv nii masina kui ka lõikevedelikuga.

Image description

Pakume erinevaid hooldusvedelikke, mis aitavad hoida vedeliku, ringlussüsteemi ja masina heas seisukorras ning pikendada nende kasutusiga.

Image description

Meie kogenud spetsialistide meeskonnad hooldavad vedelikke ja masinaid klientide juures kohapeal.

Image description

FUCHS kaugtehniline tugi klientidele hõlmab pidevat nõustamist ning arenenud lahendusi vedelike kaugjälgimiseks, näiteks veebipõhised vedeliku seisundi mõõtmise seadmed ja telemeetria.

Consulting and advice

You are always supported by our technical experts:

  • onsite testing
  • finding the right product and service
  • trainings
  • lab tests of working fluids
  • local availibility of FUCHS people
  • continuous technical advice

Products

Universal products for multiple applications:

  • one product for different metalworking processes
  • one product for different materials being processed
  • one product for different plants all over the world

Tailor made solutions:

  • products adjusted to customer's processes
  • products created for customer's individual applications
  • services designed to support customer's operations

Services

At FUCHS, we believe that providing you with the right service & support is just as important as providing the right high quality lubricants. You can choose from different possibilities, and create new ones: 

  • supply chain management
  • lubricants management
  • equipment management
  • monitoring
  • consulting
  • other services

How can we help?

Problem

Solution

Foaming

Use proper product, containing relevant additives, adequate to water hardness, e.g. ECOCOOL GLOBAL 20. 

To choose right fluid, specific for your operations contact us at: ........................................

Biostability

Choosing right emulsion and / or proper maintanance of metalcutting fluid should help in solving this issue. 

For advice and testing contact ...................... 

CorrosionDifferent aspects may influence corrosion (bacteria, pollution, wrong concentration etc.). ECOCOOL GLOBAL 20 has a very good corrosion protection characteristics. Contact us for more advice. 
Low tool lifeUsing a powerful, properly tailored metalworking fluid helps to extend tool life. Based on customer's local conditions and requirements we'll choose the most efficient fluid. 
Impurities from workpiece and limescaleUse right emulsion with good cleaning properties (e.g. ECOCOOL CUT BFF). 
Skin allergiesUsing wrong type of emulsion containing harmgul ingredients might cause skin allergies. However, there might be other reasons. Changing the emulsion or treating it with proper measures is helpful. Get in touch with us to discuss the detalils. 

Economic benefits of suitable choise of coolant

Choosing proper coolant is crucial for metal cutting operations to ensure smooth operaions: cooling and heat dissipation, improved surface finish, corrosion protection, operator's health and safety, etc. But when deciding on metalworking fluid, it also important to take into account financial aspects. High quality emulsions enhance cutting performace by reducing friction and heat generation during machining operations and thus improve surface finish, dimensional accuracy and extend tool life. This leads to reduced tooling costs and increased productivity.

Check our estimations made on the basis of cooperation with our customers struggling with very high consumtion of tools (*):

Competitive Coolant:

  • Machined 6 pcs (1 pc of edge); price of the slice € 15.56 x 6 slices = € 93.36
  • Price per produced pc € 93.36 / 96 pcs = € 0.97

 

FUCHS ECOCOOL Coolant:

  • Machined 17 pcs (1 pc of edge); price of the slice € 15.56 x 6 slices = € 93.36
  • Price per produced pc € 93.36 / 272 pcs =  € 0.34

 

Competitive Coolant:

  • 32 pcs produced, dril price = € 171/ pc ​​​
  • ​​​Price per pc produced = € 5.35

FUCHS ECOCOOL Coolant:

  • 84 pcs produced, dril price = € 171/ pc ​​​
  • ​​​Price per pc produced = € 2.04

Competitive Coolant:

  • 28 pieces produced; slice price € 12.39 x 16  = € 198.24
  • Price per piece produced: € 198.24 / 56 = € 3.54

FUCHS ECOCOOL Coolant:

  • 53 pieces produced; slice price € 12.39 x 16  = € 198.24
  • Price per piece produced: € 198.24 / 106 =€ 1.87

Competitive Coolant:

  • 48-50 minutes

FUCHS ECOCOOL Coolant:

  • 31-32 minutes

We're problem solvers and solution seekers

 

Reliability, safety and performance

Supporting our customers in their daily operations is our main driver. Our dedicated team provides comprehensive solutions and services that enhance efficiency and productivity, enabling our customers to focus on their core business. With our expertise and innovative products, we are here to ensure seamless operations. 

  • durability: specially formulated emulsions that withstand the toughest operating conditions, provide durability that ensures uninterrupted operations and minimal downtime.
  • biostability: biostable metal processing fluids that maintain their stability over time, keeping your machines running smoothly without the worry of bacterial growth.
  • skin neutrality: fluids neutral to skin (if used in accordance with instructions) to ensure a comfortable and worry-free work environment.
  • corrosion protection: fluids offering high corrosion protection, safeguarding your valuable metal surfaces against rust and oxidation.
  • extended lifespan of tools: reduction in friction and heat generation during machining operations help minimize tool wear and prolong tool life, leading to cost savings and increased productivity.

Worldwide experience with thousands of customers in multiple segments

Thanks to our established global presence, you will be served wherever your operations are, and whatever your industry segment is. Our extensive worldwide experience has allowed us to understand the unique needs and challenges of different industries, enabling us to deliver tailored solutions and expertise. From automotive and industrial manufacturing to aerospace and energy sectors, our diverse customer base reflects our ability to provide exceptional lubrication solutions to a wide range of industries worldwide. 

Products for different operation types

We understand the diverse range of operations you undertake. Whether it's cutting, chipping, drawing, sawmilling, grinding, turning, punching, thread cutting, casting, thermoforming, bending, pressing, milling, forging, or thermal and surface treatments, FUCHS is there to provide us with tailored solutions for each operation.When it comes to coating, weoffer specialized products that protect our metal surfaces, enhancing durability and preventing corrosion. Even in drilling operations, we'll support you with our range of high-performance lubricants that maximize productivity and extend tool life.

 

Frequently asked questions

Service life of a water-miscible cutting fluid depends on very many factors as concentration is used and it’s maintenance, start water parameters and quality,  product biostability, tramp oil leakages, material is machined, metal cutting operations, volume of fluid in the system, filtration effectiveness is used, downtimes and service brakes during the process, environment cleanliness etc.

In general metal working fluids work around 1 year in the system, however the same product can work even 4 years without replacement or 3 months only depends on impact of other factors.

pH level of water miscible fluid in the system, impurities level, cleanliness of the system, start water parameters, corrosion issues,  machine producer recommendations are main factors which decide about time to replace coolant.

Boron and chlorine components are not desirable in metalworking fluid because of their harmful effect. Boron acid in metalworking fluid is toxic for reproduction. Chlorine components, chloroparaffins with medium- and long-chains, which used as EP additives in metal cutting fluids, are heavy environmental pollutants which have potential for bioaccumulation. FUCHS uses health and environmentally friendly alternative additives in metalworking fluids.

There are water miscible metalworking fluids which are possible to use for machining of different metals. Ecocool AFC 1515 LC from FUCHS is relevant to use for aluminum, steel , alloy steel, yellow metals and cast iron cutting operations in many applications. Ecocool Global 10 is possible to use for heavy operations on aluminum alloys, even aeronautic, titanium, steel and alloy steel, yellow metals. However using more specialized product for each material group is more effective due to optimized properties like lubricity level, anticorrosion properties, compatibility and some others,  which are required for different materials types.

It is important to remember that type of operation, start water parameters, coolant pressure in the system and total volume are also important for coolant selection.

Contact us for more information:

Phone:
..........................

E-mail:

..........................

Our products at work

We work with:

DMG Mori

Arcellor Mittal

TOYOTA

Teeninduskontakt
+372 625 7780
Tööaeg:

E–R: 8.00–17.00