RENOLIN AC 68
The range of RENOLIN AC COMPRESSOR OILS has been developed to embrace a wide range of equipment maker's specifications and requirements. The products have been subjected to ongoing development over many years and represent a modern approach to compressor lubrication. The range is based on selected low volatility mineral oil fractions to give freedom from deposits caused by oil carry over. Inhibitors are incorporated to control foaming, oxidation and to minimise mechanical wear.
RENOLIN AC68 are intended primarily for the lubrication of reciprocating compressors according to manufacturer’s recommendations. Both products may be used for the drip feed lubrication of gears and drive mechanisms in certain screw compressors where oils of this viscosity are stipulated by the machine manufacturers. RENOLIN AC68 may also be used in certain sliding vane type compressors where oils of this viscosity are recommended by the equipment makers. Provide miniumum drain intervals of 2000hrs in screw and 1000hrs in vane use.
- Low volatility
- Good separator/reclaimer life in vane and screw machines
- Low oil consumption and carry over
- Excellent oxidation stability
- Effective corrosion protection
Industries
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
