CEPLATTYN GT 10
Light-coloured, high-viscosity adhesive lubricant with white solid lubricants for Open Gears
Performance Features
- temperature range: 0/+140 °C / +32/+280 °F; recommended application temp.: > +10 °C/+ 50 °F
- excellent wear protection
- very good dry running properties
- unlimited suitability for kiln and mill drives
- no self-ignition on the hot kiln shell
- thick lubricating film
- very good lubricating film stability on the stationary tooth flank
- free of solvent and bitumen
Description
CEPLATTYN GT 10 is a high-viscosity adhesive lubricant for heavy-duty Open Gears, e.g. on kilns, mills and driers in the raw materials industry. CEPLATTYN GT 10 is based on a synthetic base oil, new types of additives, and a combination of white, reaction-effective solid lubricants. This combination guarantees an extraordinarily good wear protection and an extremely high lubricant film stability. CEPLATTYN GT 10 together with CEPLATTYN GT P (Primer) and CEPLATTYN GT RN (Running-In) represents the FUCHS LUBRITECH Multi-Phase Lubrication.
Field of application
CEPLATTYN GT 10 has been especially developed for the application on Open Gears under critical operating conditions, such as low-speed kiln drives with increased tooth flank temperatures, mill drives with extreme drive power, and drives which are frequently operated under start-stop conditions. CEPLATTYN GT 10 includes flame-retarding substances reducing the danger of ignition, e.g. on the hot kiln shell (up to 400 °C). Furthermore CEPLATTYN GT 10 has a restricted flowability outside the meshing and is thus prevented to a large extent from leaving the gear guard. As opposed to conventional fluids CEPLATTYN GT 10 develops a thick lubricating film on the tooth flank which does not flow off of the metal surface, not even after a stoppage of the equipment. Thus CEPLATTYN GT 10 reliably protects from wear in the starting phase of the equipment which can happen with conventional fluids. The high portion of reaction-effective white solid lubricants prevents a seizure of the tooth flanks even in unfavorable lubricating and meshing conditions. CEPLATTYN GT 10 meets the requirements of AGMA 9005-E01 / D-2 and has been approved by FLSmidth, KHD Humboldt Wedag, Metso, and Outotec.
Method of application
CEPLATTYN GT 10 is suitable for the application in immersion bath, circulation lubrication and spraying systems. In terms of spraying applications a heating system is recommended with ambient temperatures below +10 °C/+50 °F.
Note
Shelf life: 24 months
Ngành
- Cement
- Forging
- Mining, quarrying, exploration
- Power generation
Thông tin trên mặt này được dựa trên kinh nghiệm và chuyên môn của Tập đoàn FUCHS trong quá trình phát triển và sản xuất dầu bôi trơn và thể hiện trình độ kỹ thuật hiện tại. Hiệu năng sản phẩm của chúng tôi có thể bị ảnh hưởng bởi nhiều yếu tố, đặc biệt là mục đích sử dụng cụ thể, phương pháp ứng dụng, môi trường vận hành, xử lý trước linh kiện, khả năng ô nhiễm từ bên ngoài, v.v. Vì lý do này, chúng tôi không thể đưa ra tuyên bố đúng trong mọi trường hợp về chức năng của các sản phẩm của mình. Không được sử dụng sản phẩm của chúng tôi trên máy bay/tàu vũ trụ hay các bộ phận có liên quan. Điều này không áp dụng nếu không thể tháo lại sản phẩm trước khi lắp linh kiện vào máy bay/tàu vũ trụ. Thông tin ở đây thể hiện các nguyên tắc chỉ đạo chung và không ràng buộc. Không có bảo đảm, rõ ràng hay ngụ ý, về các thuộc tính của sản phẩm hay sự phù hợp đối với một ứng dụng nào đó. Do đó, chúng tôi khuyên bạn nên tham khảo kỹ sư ứng dụng của Tập đoàn FUCHS để thảo luận về các điều kiện áp dụng và tiêu chí hiệu năng của sản phẩm trước khi sử dụng. Người dùng có trách nhiệm kiểm tra sự phù hợp về mặt chức năng của sản phẩm và sử dụng sản phẩm với sự cẩn thận tương ứng. Sản phẩm của chúng tôi được phát triển không ngừng. Do đó, chúng tôi bảo lưu quyền thay đổi dòng sản phẩm của mình, các sản phẩm và quá trình sản xuất của chúng, cũng như tất cả chi tiết trên đây vào bất cứ lúc nào và không có thông báo, với điều kiện không có thỏa thuận cụ thể với khách hàng quy định khác.